How to connect cellular data to iphone. Turn on Internet on iPhone

The Internet on the iPhone plays an important role: it allows you to surf on various sites, play online games, upload photos and videos, watch movies in a browser, etc. The process of turning it on is quite simple, especially if you use the quick access panel.

When you enable mobile access to the World Wide Web, you can configure certain parameters. At the same time, a wireless connection can be established automatically with the corresponding active function.

Mobile Internet

This type of access to the Internet is provided by the mobile operator at the rate you choose. Before turning on, make sure that the service has been paid and you can go online. You can find this out using the operator’s hotline or by downloading the proprietary application from the App Store.

1. Go to "Settings"  your smartphone.



2. Find item "Cellular".



3. To enable mobile Internet access, you must set the position of the slider "Cellular Data"  as indicated in the screenshot.



4. Going down the list, it will become clear that for some applications you can turn on cellular data transfer, and for others, turn it off. To do this, the position of the slider should be as follows, i.e. highlighted in green. Unfortunately, this can only be done for standard iOS applications.



5. You can switch between different types of mobile communications in “Data Parameters”.



6. Press on Voice and Data.



7. In this window, select the option you need. Make sure that there is a daw icon on the right. Please note that by choosing a 2G connection, the owner of the iPhone can do one thing: either surf in the browser or answer incoming calls. Alas, this cannot be done at the same time. Therefore, this option is suitable only for those who want to save battery power.

Option 2: Control Panel

You cannot disable mobile Internet in the Control Panel on iPhone with iOS version 10 and below. The only option is to turn on airplane mode. Read how to do this in the next article on our website.

But if iOS 11 and above is installed on the device, swipe up and find the special icon. When it is green, the connection is active, if gray, the Internet is off.

Mobile Internet Settings

Usually these data are set automatically, but before turning on the mobile Internet for the first time, you should check the correctness of the entered data, as sometimes the settings are incorrect.

Wifi

A wireless connection allows you to connect to the Internet, even if you do not have a SIM card or a service from a mobile operator is not paid. You can enable it both in the settings and in the quick access panel. Please note that turning on airplane mode will automatically turn off mobile Internet and Wi-Fi. To turn it off, see the next article in Method 2.

Option 1: Device Settings

Option 2: Enable in Control Panel

Apple produces high-end smartphones, but this does not exclude the problem that gadget users sometimes encounter - the Internet does not work on the iPhone. The problem arises with different mobile operators. Most often this is due to incorrect settings, but there are also more serious reasons. Follow simple instructions to understand why the Internet sometimes doesn’t work well on smartphones and how you can troubleshoot your iPhone yourself.

How to identify a problem

Problems with unlimited mobile Internet are quite simple to distinguish from any others. Key symptoms of malfunctions:

• you cannot access the Internet on your iPhone (via 3G, LTE or Wi-Fi)
• modem mode does not turn on (or iPhone does not work as a Wi-Fi access point)
• the Internet is working intermittently or if there is a connection icon on the screen of a mobile phone, pages are not displayed

If you encounter a system error, just restart your smartphone - after switching on, the unlimited Internet function should work as usual. Also, sometimes it helps to switch to the "Airplane" mode, and then return to normal mode. If simple actions didn’t help, you should look for the error in the phone’s settings, software or hardware.

Why LTE stopped turning on

The reasons why the Internet does not work on the iPhone are different. The most common problems iPhone users face are:

• error in wireless settings or 3G connection
• iOS system error
• iPhone hardware breakdowns
• sIM malfunction

In most cases (especially when it comes to software problems), you can fix the situation yourself.

There is network coverage, but the Internet does not work

Errors in the LTE connection most often come from the mobile operator. Typically, a similar problem occurs after a hard reboot of the device or a reset. Even with good network coverage, unlimited Internet may not function. It is easy to distinguish this problem from others - the antenna of the cellular network is displayed in the status bar, but the icon disappears. The following actions will help correct the situation:

• go to the iPhone settings
• select the "Cellular Network" tab
• find the “Data Transfer” menu
• print the APN and username, having previously specified them with your mobile operator

However, before checking the settings, make sure that you have paid for the Internet, there is network coverage, and the operator provides this service. Specify details about mobile tariffs. If your Internet often does not work correctly, discuss technical assistance with your mobile operator. Some users, in order to eliminate the problems that arise, change the mobile operator to a more suitable one.

If the 3G icon disappears

When the 3G icon in the status bar is displayed, but the browser does not load the page, you should eliminate the problem with the browser. The easiest way is to download all the proposed updates to the application or delete it and reinstall it. If you are using a standard browser, try the following steps:

• disable javascript in browser
• restart the phone (Power + Home)
• close the browser by double-clicking the Home key and swiping the application tab with swipe up

Many owners of iPhones faced poor page loading and following links after upgrading the operating system to version 9.3. Updating the iOS system to the latest version will help solve the problem.

The methods described above are relevant only if the problem is caused by a browser error, and from the side of the mobile operator there are no problems with LTE mobile communication. If the network or cellular data icon still disappears, you should look for other reasons.

Data Network Issues

An internet connection may not be available if the cellular data network is disconnected. Look in the settings of the mobile phone - if it is disabled, then the icon in the status bar disappears. To connect the network, follow these steps:

• go to the connection settings menu
• make sure that in “Cellular data” and “Enable 3G” the slider is in the activated state
• turn on cellular information if necessary

Even if the cellular connection worked properly, the coverage of the cellular network may be different, which is why the smartphone does not always receive a signal. Operators cannot provide equally good cellular reception in different parts of the city. If the 3G icon changes to E or H +, this is not considered a malfunction.

How to connect modem mode

If the mobile Internet on your smartphone does not work in modem mode or the device does not allow you to connect to the network in access point mode, make sure that the corresponding function is enabled. Make it simple:

• go to settings menu
• select "Modem Mode" or "Cellular Data" - "Modem Mode"
• move the slider to the on position
• check the settings and password that your mobile phone will generate

If everything is in order, you should restart the phone. Typically, the modem mode function is then restored. The same actions are recommended to be performed in the absence of the possibility of creating access. Another way is to reset the settings to factory defaults and then enter all the parameters manually.

What to do if the smartphone stops accepting cellular communications

If you rebooted the phone and even reset it to the factory settings, but the problems still remain (the 3G icon is not in the status bar, there is no Internet access), the problem may lie in the hardware of the smartphone. Repairing the wireless module or other elements on its own can lead to damage to the manufacturer’s seals, therefore it is better to contact the service center with iPhones for warranty.

Setting up the Internet on the iPhone (4, 5, 6, 7, 8, X, SE) is a delicate and delicate process. Like any other more or less modern smartphone, the iPhone can connect to Wi-Fi, 3G, 4G, and in the near future, 5G. It seems to be obvious, and what can be complicated in setting up the Internet in this?

However, many Apple users who use the smartphones of this company relatively recently periodically encounter problems with incorrect settings, which is why they cannot use this function. In this article we will tell you how to properly configure the Internet on the iPhone to use it to the maximum.

Perhaps we’ll start by setting up the mobile Internet on the iPhone, as it is the most widespread and demanded.

1. First, go to "Settings" → the "General" section → the "Network" tab.

2. In the "Cellular Communications" section, scroll down, find the subsection "Cellular Communications" and enter it.

3. Pay attention to the “Cellular Data” block. Here 3 fields should be filled: APN, username, password.

For mobile Internet operators, you must enter the following data:

Internet and MMS settings for iPhone

Internet and MMS settings on iPhone and iPad

Kyivstar mms, internet settings for iPhone 5

Reset APN if problems occur

If all the data is entered correctly, but there is no Internet, the best way would be to reset the APN settings for their subsequent automatic or manual entry. To return to the default APN settings, do the following:

1. Open the "Settings".

2. Select the “Cellular” section.

4. Select the "Reset Settings" function. If you set a configuration profile, the default profile settings will be used instead.

Setting (turning on and off) Wi-Fi on iPhone X, 8, 7, 6, 5

Next on our list is connecting and setting up a Wi-Fi network. Connecting to the network is extremely simple and the only data you need to enter is the set password (if the network is not open or public).

Here's what you need in order to connect to Wi-Fi:

1. Click the “Settings” icon on the main screen, and then click “Wi-Fi”.

2. Make sure the Wi-Fi slider is set to active, then select the network to connect. If you have previously connected to a specific network, while in the coverage area of \u200b\u200bthe access point, the smartphone will automatically connect to the network.

3. After you select a network, a message appears asking for the password. .

4. Enter the password for the network.

5. Click the "Join" button.

6. Passwords are usually not required for free, public Wi-Fi networks. However, before connecting to such networks, you should take care of security in order to avoid unpleasant situations with data loss and interception.

If you cannot click "Join", it means that the password you entered is incorrect. Please try again or contact your network administrator for further assistance.

After you have successfully joined the network, a checkmark will appear next to the network name, and the Wi-Fi signal strength indicator will be displayed in the upper left of the screen.

If you are a happy owner of a new iPhone, then you can’t wait to try out all its features and, most importantly, to find out how you can turn on or off the Internet.

Now it’s hard to imagine your usual day without the Internet at all, anyway we need it: for work, study, just entertainment.

In today's article, I will not go into any complicated details of Internet settings on your iPhone. I'll just talk about the most basic aspects that will help you use your brand new iPhone.

How to connect / turn off the Internet on an iPhone

So, as you know, there are different ways to get out into the beautiful and unique world of the Internet. There are only two on the iPhone, as elsewhere.

Before proceeding to the instructions, I’ll talk a little about the pros if you use your iPhone to surf the Internet:

• always the best modems;
• support for the latest standards;
• ease of connection.

Now let's deal with each method individually. I will write everything in sufficient detail so that there are no further questions (I used the latest iOS 10.1.1).

The easiest and most free way to use the Internet on the iPhone has always been Wi-Fi. You can find it everywhere, because now you can find free Wi-Fi in almost any cafe.

Apple devices are always difficult enough to meet, only then after a couple of weeks you realize that everything is quite logical and practical.

There are two ways to connect the Internet via Wi-Fi, start with the first, when you want to choose a network manually:

• go to Settingsgo to paragraph Wifi;
• activate it by moving the switch until it turns green;
• now all available networks appear and you select the one you need.

  If there is a lock, it means that the network is locked with a password. In its absence, you can connect and start surfing the Internet.

Second way  much simpler, but it is more suitable for the case when you previously connected to any network. Just calling Command centre  and activate the wifi icon.

  For this panel to appear, simply swipe up from the bottom. With this item done and now you can go to the mobile Internet.

In almost any country, if you use a mobile operator, the Internet of various standards is almost always attached. It depends on the coverage and most often it is 3G or 4G.


  On the iPhone, this setting has constantly changed, but not critically. I will tell you how to connect or disconnect on the latest firmware and I think it will be possible to navigate on older models too.

The whole process will look something like this:

1. go to Settingsclick cellular;
2. activate Cell data.

  If you want to change the standard, then in the same menu just select Data options  and there you will find everything. You can switch from 3G to 4G and vice versa.

Users often ask about how to turn off the Internet on the iPhone. Most often, in such matters they mean mobile Internet (, 3G, 4G LTE), but it can also be the Internet via Wi-Fi.

In any case, this is done very simply. In this article we will consider both ways to turn off the Internet. The material will be useful for most iPhone models, including iPhone 4, 4s, 5, 5s, 5se, 6, 6s and 7.

How to disable mobile Internet on iPhone

When asked about how to turn off the Internet on an iPhone, most often they mean exactly the mobile Internet (GPRS, 3G, 4G LTE). The need to turn off mobile Internet can arise for various reasons. For example, they turn off mobile Internet in order to save on mobile communications in roaming, where the Internet often costs some unrealistic money.

If you need to disable mobile Internet, then open iPhone Settings and go to the "Cellular" section. In modern versions of iOS, this settings section should be almost at the very beginning, after the sections “Airplane mode”, Wi-Fi and Bluetooth. In iOS 6 and older, you must first open the "General" section.

In the "Cellular" section, a lot of options are available. At the very top you will see three switches: “Cellular Data”, “Enable 3G” and “Data Roaming”. Consider these three switches in more detail.

• « Cell data "- when you turn off this switch, you completely turn off all mobile Internet on your iPhone. Access to the Internet will be possible only through Wi-Fi.
• « Enable 3G  "- a switch that is responsible for enabling and disabling 3G internet. If you turn off 3G Internet, then the mobile Internet will work on 2G technology (EDGE), and the speed will be no more than 474 Kbps.
• « data roaming "- a switch that is responsible for the operation of mobile Internet in roaming. If you turn off data roaming, the mobile Internet will not work in roaming mode, while the Internet will work normally in your home network.

In addition, in the settings section "Cellular" you can enable or disable mobile Internet for individual applications. To do this, scroll down the page with the settings. There will be a list of applications that use the Internet. At the same time, next to each application will be indicated the amount of data that it transmitted, and on the right there will be a switch with which you can turn off mobile Internet for this application.

Having studied the information on the amount of data transferred, you can easily determine the applications that consume the most traffic and turn them off. Thus, you can start without turning off the mobile Internet at all.

How to turn off the Internet via Wi-Fi

If you need to turn off the Internet, which works through a wireless Wi-Fi network, then this is made even easier. First, open iPhone Settings and go to the “Wi-Fi” section, which is located almost at the very top.

In principle, you can turn off the Internet via Wi-Fi without going into the iPhone Settings. To do this, simply swipe from the bottom of the screen in order to open the "Control Center" and click on the Wi-Fi button.

After that, the Wi-Fi button will become dark. This will mean that Wi-Fi internet is disabled.