How to turn on the timer on the DSLR. Using Camera timer to take selfies and group shots

Sometimes you need to take a joint picture with friends or family, but there is no one nearby who could take a picture of you. This problem can be solved by taking a selfie, but not everyone likes these pictures, and besides, they are not as high-quality as pictures taken on the rear camera.

Another possible solution is to enable a timer. In this article, we will consider this particular option. Here you will learn how to put the iPhone camera on a timer and take a good shot. The article will be useful to users of all iPhone models, including iPhone 4, 4s, 5, 5s, se, 6, 6s. 7, 8 and X.

Step No. 1. Launch the camera.

Naturally, in order to take a photo, you will need the Camera application. If your iPhone is locked, then you can start the camera with a swipe on the lock screen (swipe is done from right to left), in other situations, just launch the Camera application using the shortcut on the desktop.

Step No. 2. Press the timer button and select a time.

Next you need to turn on the timer. To do this, the “Camera” application has a special button that looks like a dial with an arrow. Click on this button and select the time after which the camera should work. Only two options are available here: 3 and 10 seconds. It is not possible to set another time.

If you need to set a timer on the iPad, then everything is exactly the same. The only difference is the location of the timer button. On Athos, this button is located on the opposite side of the screen from the shooting button, and on iPad, this button is located next to the shooting button.

Step No. 3. Press the capture button.

After you turn on the timer, get ready to shoot. Set your iPhone so that everything you need falls into the frame. The best option is to use a special tripod for smartphones. If there is no tripod, then the iPhone can be fixed with the help of personal items. For example, for these purposes it is very convenient to use books.

When everything is ready - click on the capture button. After clicking, you will have 3 or 10 seconds to take its place in the frame. During these 3 or 10 seconds, a timer will be displayed on the iPhone's screen, which will count seconds. When the time runs out, the iPhone camera will take a series of 10 photos. In the future, you can view these pictures and select the one that turned out to be the most successful.

It should be noted that after using the timer, it does not turn off automatically. Therefore, if you do not turn it off, it will be active the next time you shoot. The timer turns off just like it turns on. Press the timer button and select the “Off” option.

I am using a Canon EOS 500D with a Canon EF 1.8 USM portrait lens.

I would like to set continuous self-timer in drive mode for continuous shooting of 10 images with 10 second intervals between photos .

Yesterday I somehow accidentally did it in P (Program mode) to take portraits of my wife and me.

Today I changed some settings and get only 10 shots taken continuously with an interval of 1 second. Now we are on vacation, trying to shoot a couple of portraits in continuous driving mode. I am disappointed that I could not achieve this. For more information, I also have a Canon remote. I tried all driving modes to achieve this again, but I was not able to defeat him.

Many people confuse this issue for more information.

The answers

xtarsy

The first option, and I think this is what you activated, can be found here:

The Canon T2i Drive option also provides access to three self-timer modes that open the shutter 10 or 2 seconds after you press the shutter button, giving you time to rush in front of the camera. The third mode will accept a programmable number of shots (from 2 to 10 shots) after a 10-second delay. The remote control mode also works with dedicated and wireless remote devices.

(also available for 500d)

My second suggestion is addon Magic Lantern for canon (compatible with canon 500d).

By adding this firmware to the camera, you will get access to the built-in intervalometer, where you can set the amount of time between shots.

(This firmware addon adds many new tools besides the interval meter. (Focus peak, exposure bracketing, stack focus, follow the focus. You can learn more about the magic flashlight firmware on this site: Magic Lantern)

Intervalometer: ON / OFF
Take pictures or movies at fixed intervals. You can stop the intervalometer by rotating the mode dial. Settings: Duration between two shots. Linear glow option (see below). In movie mode only: clip duration.

For more than a year now I have been using this addition to the firmware in combination with the Canon 550D to create interval and slow shutter speeds.

Even for a beginner, Magic Lantern is easy to install and use.

Ravi

Thanks for the information I have never heard of Magic Lantern. Of course I will play with him. But in my case, I want it to work only with the first options. I can’t update the firmware right now. I tried all three self-timer modes to achieve this, and now it does not work. so it would be great if you could tell me how to achieve this using only the Canon T2i drive settings without any add-ons.

Ravi

Finally, I upgraded my camera to a magic lantern, and this solved my endless problem :)

Sometimes you want to capture yourself against the background of an object or in the company of friends, but you don’t see people wishing to take a picture. It's okay, because the camera itself can take pictures if it is properly configured. Or rather, use the "timer" function.

Instruction manual

Make sure your camera has a timer function (or self-timer). If you do not know how to turn it on, read the instructions for the camera.

Set the light settings. If you are new to photography, select Auto. In dimly lit rooms, use the flash.

Find a support for the camera. A table, chair or any other piece of furniture in the room, any flat surface on the street is perfect. Do not forget about the security of your camera - check whether it is securely installed, whether it can fall from an accidental shock.

A tripod is ideal. If you often take pictures of yourself, think about buying it. Using a tripod, you can easily capture frames with yourself.

Build the composition of the frame. Look in the viewfinder (or on the camera display) at the place where you are going to take pictures. If you will be filming more than one, ask your friends to get up for the frame. Move your focus. Adjust the desired approximation (of course, from the place where the camera will stand), take a test shot. Are the light settings in order, does everything fit in the frame, are there any foreign objects in the photo.

Set the timer. Typically, a delayed descent is suggested at 5, 10, 30 seconds. Estimate how long it will take you to get to the place of shooting and take the desired position. Set the timer, press the trigger and run to your place. However, you should not be in a hurry - you will only create an atmosphere of panic and laughter, which can interfere with the original idea.

Warn your friends that after how many seconds the shutter will release. Typically, cameras are audible every second. Make sure that until the photo is taken, no one in the frame moves or changes position.

Wait for the sound signal that the photo is ready and look at the result. Timer shooting is not an easy task, so be prepared for the fact that you will have to make several attempts.

The answer of the master:

Sometimes, almost every person has a desire to make a photo with him / her beloved on the background of some interesting object or among friends, but, looking around, who wants to take a picture of you, is not found. In this case, the camera itself can play the role of the person who wants to take a picture, provided of course, if the timer function is correctly set in it.

First you need to make sure that the "timer" (or self-timer) function on your camera is available, for which you need to turn on the camera. If you just bought it and have not yet learned how to use it, it is best to start by reading the instructions. At the same time, and become comfortable with its use.

Now that you have studied the instructions, you need to set the light settings. In the event that you are a beginner in photographing, it is best to choose the automatic mode, and in rooms where there is little light use a flash.

In order to photograph yourself, you need to find a support for the camera, for which any flat surface is perfect, whether it is indoors or outdoors. Do not forget to check in advance the stability of the camera on your chosen surface so that the possibility of its fall from an accidental shock is excluded. A tripod is ideal for installing and securing the camera, the purchase of which is worth considering if you often photograph yourself.

To begin the process of photographing, you need to build a composition of the frame, for which you need to look in the viewfinder (or on the camera display) at the place where you want to take a picture. If you want to take a picture with friends, then tell them that it is time to get in the frame. Then it is necessary to focus, for which it is necessary to adjust the desired approximation, always from the point where the camera will stand. Check in advance the following - the light settings, whether everything fit in the frame, whether there will be unnecessary objects in the picture.

Before the photographing process itself, you need to set a timer where the delay in the descent is usually offered at 5, 10, 30 seconds. Choose the time interval you need in order to calmly go to the place of shooting and take your pose. You should also warn your friends that the shutter will work after a few seconds, and during this time, ask none of those in the frame to move or change their position. It is not difficult to understand when the shutter of the camera worked, since usually this moment is marked by an audio signal.

After you wait for a signal that the picture has been taken, go to the camera and look at the result. Timer shooting is not an easy task, especially for beginner photographers, so be prepared for having to take a picture several times

Do you want to take a great picture with your friends - and so that all the right people get into the frame, including yourself beloved? Nothing is simpler - just activate the countdown. How to do this on the iPhone, we will describe further.

In contact with

Despite the fact that the function Self timer The camera registered in the iOS system application for a long time, many users do not even suspect its existence or do not know what its benefits are. We hasten to correct the annoying flaw - it’s worth it, the quality of your pictures will certainly improve!

Using Camera timer to take selfies and group shots

1 . Place your iPhone / iPad on a flat surface, stand, or tripod.

2 . Run the application Camera on your iOS device. You can also start the camera either from the Control Center (“curtain”, called up by swipe up from the bottom of the screen), or directly from the lock screen (swipe to the left).

3 . Touch the small stopwatch icon (located to the right of HRD).

4 . Choose one of two options - 3 seconds or 10 seconds. The first option is suitable for shooting as quickly as possible (you do not need to run far from the camera), the second - for those pictures when you need to run to a group of friends and have time to take the desired pose / facial expression.

5 . Press the shutter button - a white circle on the screen or physically increase the volume button - the "plus" on the left side.

6 . In the lower right corner, a countdown will begin. It's time to run to friends!

Done - your selfie or shared picture with friends or relatives is already saved in the iPhone / iPad.

Photographs taken in this way are of higher quality, they are clearer, more diverse and just funnier. If necessary, the resulting result (the button of the same name in the upper right corner in the Photo application) and send it to everyone who is dear to you.